The GSA-014 is based on a single needle gauge and has the proper faceplate for indication Flaps position.
The faceplate shows a Boeing flap configuration with 9 positions, ranging from UP,1,2,5,10,15,20,25,30,40 degrees.
The stepper motor gives very smooth needle movements.
The GSA-014 comes without a bezel so it can be mounted directly behing existing panels, for example from FDS or Engravity.
height 60 mm
width 60 mm
depth 30 mm
weight 150 gr
mounting 4 screws
power= 5v/12v (included within the flatcable, so only a single connection to the interface is required!)
lights= 2 LED
type daisy chain, 10 pin connector on flat cable (10 wires flatcable)