No products in the cart.
The CAV-ATC is a replica of the Collins radio module that is used to tune in transponder code. It connects with the GSA-55 interface and reads/writes data directly from Flight Simulator or X-plane. The COM radio can be set to any code for startup (EG 1200 or 7777,…) in our software. The radio has 2 sets of display, one for the active frequency and one for the Standby frequency. these are tuned in by a dual rotary encoder and a transfer switch toggles between ACT and STBY frequency. A TEST button lights up all the LED segments. You will need the GSA-55 to connect the gauge to the simulator.
height 65,95 mm
width 60 mm
depth 22,5 mm
mounting 4 screws
power= 5v/12v (included within the flatcable, so only a single connection to the interface is required!)
Radio has (dimmable) backlit
type daisy chain, 10 pin connector on flat cable (10 wires flatcable)
You will need the GSA-055 (central interface) to connect the gauge to the computer.
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.